FOR PARTS/REPAIR – While the time can be set without issue and the movement runs strong over an approximate 45 hour power reserve period with both the day and date wheels rolling over as they should, the movement does run about 6 minutes slow during that time. And as clearly seen in the tenth picture the oscillating weight is loose. Additionally, the inner bezel was removed at some point. This vintage Camy Rallyking has a monochromatic “- SWISS MADE -” signed dial that under the damaged crystal appears to be in lovely condition. The original lume, which emits a faint glow after being exposed to bright light, has aged gracefully to a warm buttermilk hue. The inner bezel was removed at some point. The all stainless steel case shows honest wear with insignificant signs of oxidation. The crystal needs to be replaced. The 17 jewels Swiss “CAMY” signed ETA 2788-1 automatic movement with quickset date function runs strong, albeit slow, with both the day and date wheels rolling over as they should. As clearly seen in the tenth picture the oscillating weight is loose. The quickset date function works flawlessly by pulling out the bottom, non-screwdown “CAMY” signed crown to the first position and then turning it clockwise until the desired date has been reached. This particular movement does not have a quickset day function, requiring that the hands be manually turned 24 hours to advance. After winding the bottom crown 39 full revolutions the movement ran nearly 6 minutes slow by the end of its approximate 45 hour power reserve period. This crown winds smoothly. The top crown, which is a replacement, is there to control the inner bezel, which is missing. This watch measures approximately 38 mm excluding the crown, approximately 41 mm including the bottom crown and approximately 18 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the mid-case, is approximately 8.5 mm. Including the crystal thickness measures approximately 10 mm. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 12 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch.