FOR PARTS/REPAIR – Although the manual wind movement will run after winding the crown and then gently shaking and or spinning the watch face down on a flat surface it has a tendency to stop when held in various positions. Given this and considering the movement’s unknown service history a complete overhaul is required. This seldom seen vintage 1970’s Belforte has a matte black 9200 T. Although the manual wind movement will run after winding the crown and then gently shaking and or spinning the watch face down on a soft, flat surface it has a tendency to stop when held in various positions. The original non-screwdown crown winds smoothly. Given that the movement does not run as it should and considering its unknown service history a complete overhaul is required. This watch measures approximately 37 mm excluding the crown, approximately 40 mm including the crown and approximately 20 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the bezel, is approximately 7 mm. Including the crystal thickness measures approximately 9.5 mm. Given that the movement starts and stops and considering its unknown service history a complete overhaul is required. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 12 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch.