https://watch-repair-part.net Mon, 29 Jun 2026 06:06:08 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://watch-repair-part.net/2026/06/03/vtg-zodiac-strong-automatique-17j-cal-1225-swiss-bumper-men-watch-repair-parts/ https://watch-repair-part.net/2026/06/03/vtg-zodiac-strong-automatique-17j-cal-1225-swiss-bumper-men-watch-repair-parts/#comments Wed, 03 Jun 2026 16:30:47 +0000 https://watch-repair-part.net/2026/06/03/vtg-zodiac-strong-automatique-17j-cal-1225-swiss-bumper-men-watch-repair-parts/ Read more]]>












This vintage Zodiac Strong Automatique is being offered as a non-running project watch for parts or professional repair. The removal of the case back confirms it houses an authentic, 17-jewel Swiss-made Zodiac Calibre 1225 bumper automatic movement. The gold-tone case measures 33.15mm and retains its distinct mid-century down-turned lugs. The cream-toned dial exhibits a striking, honest “snowstorm” patination across the finish, featuring an alternating even-number Arabic numeral configuration with applied gold-tone dart indicators and dauphine hands. The screw-down stainless steel case back is sharply engraved with the “Zodiac Strong” insignia. Whether you choose to bring this classic bumper back to life or utilize its components for other 1225 caliber builds, this timepiece offers an excellent array of original factory parts. Thank you for looking, and please feel free to reach out if you have any questions!

]]> https://watch-repair-part.net/2026/06/03/vtg-zodiac-strong-automatique-17j-cal-1225-swiss-bumper-men-watch-repair-parts/feed/ 0 https://watch-repair-part.net/2025/06/04/vintage-revita-20-atm-all-ss-diver-watch-withpatina-runs-strong-for-partsrepair/ https://watch-repair-part.net/2025/06/04/vintage-revita-20-atm-all-ss-diver-watch-withpatina-runs-strong-for-partsrepair/#comments Wed, 04 Jun 2025 22:47:50 +0000 https://watch-repair-part.net/2025/06/04/vintage-revita-20-atm-all-ss-diver-watch-withpatina-runs-strong-for-partsrepair/ Read more]]>


















Although the automatic movement runs strong and keeps accurate time the date wheel doesn’t roll over. Given this and considering the movement’s unknown service history a complete overhaul is required. This seldom seen vintage 1970’s Revita is an example of a watch that in my humble opinion looks markedly better in person. It has a glossy black “T SWISS MADE T” signed dial that is in lovely but not perfect condition as it shows difficult to see, light hand drag as well as spotting. Pictures 10 through 12 were taken on flash to try to capture the faint hand drag along with the spotting (some of the spotting seen is on the underbelly of the crystal). The lume, which emits a quick burst glow after being exposed to bright light, has aged gracefully. The red bezel, which shows wear and rotates bidirectionally with an appropriate amount of tension, presents nicely. The all stainless steel case shows honest wear with no visible signs of oxidation. The outer edge of the case back is stamped WATERPROOF 20 ATM. INCABLOC AUTOMATIC ALL STEEL SWISS MADE” with “425112” and “1000 stamped in the center. The crystal shows scratching and dust/spotting on its underbelly. While I normally show pictures of the movements of watches I put up for sale the case back on this watch is torqued too tight for me to remove. Although the automatic movement runs strong and keeps accurate time the date wheel does not roll over. After recently winding the non-screwdown crown 39 full revolutions the movement had an approximate 38 hour power reserve period. The crown winds with some tension. Given that the date wheel doesn’t roll over and considering the movement’s unknown service history a complete overhaul is required. This watch measures approximately 35 mm excluding the crown, approximately 37.5 mm including the crown and approximately 19.75 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the bezel, is approximately 8 mm. Including the crystal thickness measures approximately 10.5 mm. A complete overhaul is required. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 17 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch.

]]> https://watch-repair-part.net/2025/06/04/vintage-revita-20-atm-all-ss-diver-watch-withpatina-runs-strong-for-partsrepair/feed/ 0 https://watch-repair-part.net/2025/05/27/vintage-tiara-aqua-guard-660-diver-watch-withpatina-runs-strong-for-partsrepair/ https://watch-repair-part.net/2025/05/27/vintage-tiara-aqua-guard-660-diver-watch-withpatina-runs-strong-for-partsrepair/#comments Tue, 27 May 2025 10:25:53 +0000 https://watch-repair-part.net/2025/05/27/vintage-tiara-aqua-guard-660-diver-watch-withpatina-runs-strong-for-partsrepair/ Read more]]>














Although the automatic movement loses about 3 minutes by the end of its approximate 37 hour power reserve period and the date wheel rolls over as it should the crown/stem is temperamental. While the crown/stem connection is solid it’s difficult to pull the crown out to set the time. And when the crown is pushed back in and then immediately wound the minute/hour hands want to move. When this happens I’ve noticed that by turning the crown counterclockwise several times before applying inward pressure while turning it clockwise the hands don’t tend to move and the crown can be wound smoothly. Occasionally it’ll temporarily sound like crunching before the crown begins to wind without issue. Given this issue with the crown/stem and considering the movement’s unknown service history a complete overhaul is required. This seldom seen vintage 1970’s Tiara Aqua-Guard 660 diver, which came from the estate of its original owner, has a black “SWISS MADE” signed dial that shows wear and the lume emits a quick burst glow after being exposed to bright light. The black bezel, which shows wear and rotates bidirectionally with an appropriate amount of tension, presents nicely. The chrome-plated case shows considerable wear and brassing. The outer edge of the case back is stamped “MADE IN SWITZERLAND AUTOMATIC AQUA-GUARD SUPER-WATERPROOF 45457″ with “PRESSURE-TESTED UNDER 20 ATMOSPHERES (660 FEET)” stamped along the inner edge and “INCABLOC” stamped in the center. The crystal needs to be replaced. While I normally show pictures of the movements of watches I put up for sale I’m unable to remove the case back on this watch. The automatic movement with semi-quickset date function runs strong, albeit slow, and the date wheel rolls over as it should. The semi-quickset date function works by manually rolling over a new date and then moving the hour hand repeatedly between the 20.5 and 24 hour marks until the desired date has been reached. However, while the crown/stem connection is solid it’s difficult to pull the crown out to set the time. After recently winding the non-screwdown crown 39 full revolutions the movement lost about 3 minutes by the end of its approximate 37 hour power reserve period. This watch measures approximately 35 mm excluding the crown, approximately 38 mm including the crown and approximately 20 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the bezel, is approximately 9 mm. Including the crystal thickness measures approximately 11 mm. A complete overhaul is required. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 13 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch.

]]> https://watch-repair-part.net/2025/05/27/vintage-tiara-aqua-guard-660-diver-watch-withpatina-runs-strong-for-partsrepair/feed/ 0 https://watch-repair-part.net/2025/04/28/vintage-avia-marino-20-atm-all-ss-diver-withblue-dial-runs-strong-for-partsrepair/ https://watch-repair-part.net/2025/04/28/vintage-avia-marino-20-atm-all-ss-diver-withblue-dial-runs-strong-for-partsrepair/#comments Mon, 28 Apr 2025 09:27:51 +0000 https://watch-repair-part.net/2025/04/28/vintage-avia-marino-20-atm-all-ss-diver-withblue-dial-runs-strong-for-partsrepair/ Read more]]>

























FOR PARTS/REPAIR – although the automatic movement keeps accurate time over an approximate 38 hour power reserve period the date wheel is finicky as it will manually roll over but gets hung up when trying to do so automatically on its own. Given this and considering the movement’s unknown service history a complete overhaul is required. This seldom seen vintage 1970’s Avia Marino 20 ATM diver has a blue “T SWISS MADE T” signed dial that is in lovely but not perfect condition as it shows age-related wear. When natural light hits the dial at certain angles, as seen in several of the pictures, the navy blue morphs into a lighter blue hue. The lume, which remains fully intact and emits a quick burst glow on only the dial after being exposed to bright light, has aged gracefully. Bezel, which shows wear and rotates bidirectionally with an appropriate amount of tension. The all stainless steel. Case shows honest wear with no visible signs of oxidation. The outer edge of the case back is stamped “STAINLESS STEEL – WATERPROOF 20 ATU – ANTIMAGNETIC – INCABLOC – AUTOMATIC” with “15033” stamped along the inner edge. The crystal shows scratching. While I normally shows pictures of the movements of watches I put up for sale I’m unable to open the case back on this watch. The 17 jewels automatic movement with semi-quickset date function runs strong and keeps accurate time. However, while the date wheel will manually roll over it gets hung up when trying to do so automatically on its own. When this happens I’ll manually move the hour hand several full revolutions (tends to take three) to get the date wheel to roll over and align properly. When the date wheel finally rolls over it does so to the date that it should have been had it rolled over automatically on its own. This is illustrated in pictures 10 and 11, respectively. The semi-quickset date function works flawlessly by manually rolling over a new date and then moving the hour hand repeatedly between the 20.5 and 24 hour marks until the desired date has been reached. After recently winding the signed, non-screwdown crown 39 full revolutions the movement had a power reserve of approximately 38 hours. The crown winds smoothly. Given the date wheel issue and considering the movement’s unknown service history a complete overhaul is required. This watch measures approximately 37 mm excluding the crown, approximately 40 mm including the crown and approximately 19 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the bezel, is approximately 9.5 mm. Including the crystal case thickness measures approximately 11 mm. Given the finicky date wheel and considering the movement’s unknown service history a complete overhaul is required. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 24 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch.

]]> https://watch-repair-part.net/2025/04/28/vintage-avia-marino-20-atm-all-ss-diver-withblue-dial-runs-strong-for-partsrepair/feed/ 0 https://watch-repair-part.net/2021/07/03/vintage-bessa-20-atm-diver-watch-withorange-patina-runs-strong-for-partsrepair/ https://watch-repair-part.net/2021/07/03/vintage-bessa-20-atm-diver-watch-withorange-patina-runs-strong-for-partsrepair/#comments Sun, 04 Jul 2021 03:27:04 +0000 http://watch-repair-part.net/2021/07/03/vintage-bessa-20-atm-diver-watch-withorange-patina-runs-strong-for-partsrepair/ Read more]]>













FOR REPAIR – while the movement runs strong and keeps accurate time over an approximate 38 hour power reserve period, the crown/stem pull out. It can be pushed back in and wound without issue but the date and time cannot be set. Given this issue and considering the movement’s unknown service history, a complete overhaul is required. This vintage Bessa has a glossy black dial that is in lovely but not perfect condition as it shows age-related wear and subtle hand drag that can only be seen from certain angles. The original lume, which emits a quick-burst glow after being exposed to bright light, has aged gracefully to a perfectly matching orange hue. The black bezel, which rotates with an appropriate amount of tension, shows wear. The all stainless steel case is in decent condition showing some dings with no signs of oxidation. The outer edge of the case back is stamped 20 ATMOSPHERES 100% ETANCHE A. The crystal shows scratching. A skilled watchmaker will have no problem doing so. However, the crown/stem pull out. While it can be pushed back in and wound without issue, the date and time cannot be set. After recently winding the sharply threaded, non-screwdown crown 39 full revolutions the movement had an impressive power reserve of approximately 38 hours. The crown winds beautifully. Given the crown/stem issue and considering the movement’s unknown service history a complete overhaul is required. This watch measures approximately 36 mm excluding the crown, approximately 39.5 mm including the crown and approximately 20 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the bezel is approximately 8 mm. Including the crystal case thickness measures approximately 9.5 mm. Given that the crown/stem pull out and considering the movement’s unknown service history a complete overhaul is required. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 12 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch. The item “Vintage Bessa 20 ATM Diver Watch withOrange Patina, Runs Strong FOR PARTS/REPAIR” is in sale since Saturday, July 18, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “savethetreestoday” and is located in Issaquah, Washington. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

• Case Finish: Matte/Polished
• Year Manufactured: 1970-1979
• Dial Color: Black
• Age: Vintage 1970’s
• Display: Analog
• Movement Type: Mechanical (Automatic)
• Dial Style: 12-Hour Dial
• Lug Width: 20 mm
• Case Size: 36 mm
• Type: Wristwatch
• Brand: Bessa
• Water Resistance: 200 m (20 ATM)
• Department: Men
• Style: Casual,Diver,Sport
• Case Material: Stainless Steel
• Features: Date,Push/Pull Crown,Rotating Bezel,Water-Resist

]]> https://watch-repair-part.net/2021/07/03/vintage-bessa-20-atm-diver-watch-withorange-patina-runs-strong-for-partsrepair/feed/ 0 https://watch-repair-part.net/2021/01/06/vintage-sheffield-day-date-diver-watch-withmint-dial-runs-strong-for-partsrepair/ https://watch-repair-part.net/2021/01/06/vintage-sheffield-day-date-diver-watch-withmint-dial-runs-strong-for-partsrepair/#comments Wed, 06 Jan 2021 05:30:23 +0000 http://watch-repair-part.net/2021/01/06/vintage-sheffield-day-date-diver-watch-withmint-dial-runs-strong-for-partsrepair/ Read more]]>













While the movement runs strong it tends to run anywhere from 45 minutes to more than an hour slow at the end of its approximate 38 hour power reserve period. And while the date wheel rolls over the day wheel does not. Additionally, occasionally after winding the crown several full revolutions there will be a jolt in the movement with the seconds hand stopping. When this happens I’ve observed that if the crown is pulled out, the time reset, the crown pushed back in and then the crown given several additional slow winds, being careful to stop before jolting the movement again, the seconds hand will fire back up without issue. Finally, while the dial appears to be in pristine condition, over time some dust and debris has gotten between the crystal and crystal ring, settling on the underbelly of the crystal and the dial. Most notably being what appears to be a piece of filament lying between the 6 and 7 o’clock markers. A skilled watchmaker can quickly and easily remove this dust/debris during a service. Given the issues noted above a complete overhaul is needed. This classy vintage Sheffield day-date diver has a black concentric “T SWISS MADE A1″ signed dial that is in pristine condition, free of any visibly noticeable scratching, tool marks, chipping or defects. Please note that over time some dust and debris has gotten between the crystal and crystal ring, settling on the underbelly of the crystal and the dial. A skilled watchmaker can quickly and easily remove this. The original lume on the dial and hands, which is fully intact and matches perfectly, emits a faint, short-lived glow after being exposed to bright light. The bezel, which rotates bidirectionally, looks good. The chrome-plated case shows some wear, most notably a ding on the bottom of the left lug at 12 o’clock. The crystal shows scratching. While I normally show the movements of watches I sell, the case back on this one is torqued too tight for me to remove it. A skilled watchmaker will have no issues removing it. While the manual wind movement with quickset date function runs strong it does run slow. And while the date wheel rolls over and day wheel does not. The quickset date function works flawlessly by manually rolling over a new date and then moving the hour hand repeatedly between the 20.5 and 24 hour marks until the desired date has been reached. After recently winding the sharply threaded crown 15 full revolutions (multiple times over the course of a one week observation period) the movement ran anywhere from 45 minutes to more than an hour slow at the end of the approximate 38 hour power reserve period. Please note that occasionally after winding the crown, the movement will jolt and the seconds hand will stop. When this happens I’ve observed that if the crown is pulled out, the time reset, the crown pushed back in and then the crown given several additional slow winds, being careful to stop before jolting the movement again, the seconds hand fires back up without issue. The mainspring is likely long overdue to be replaced. Given that the movement runs slow and considering that the day wheel does not work and the mainspring issue, a complete overhaul is needed. This watch measures approximately 40 mm without the crown, approximately 43 mm including the crown and approximately 19 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the bezel, is approximately 10 mm. Including the crystal case thickness measures approximately 11.5 mm. Considering that the movement runs slow, the day wheel does not roll over and the mainspring likely needs to be replaced given the occasional movement jolting, a complete overhaul is needed. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 12 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch. The item “Vintage Sheffield Day-Date Diver Watch withMint Dial, Runs Strong FOR PARTS/REPAIR” is in sale since Tuesday, July 28, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “savethetreestoday” and is located in Issaquah, Washington. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

• Movement Type: Mechanical (Manual)
• Dial Style: Non-Numeric Hour Marks
• Style: Casual,Diver,Dress/Formal,Sport
• Case Material: Chrome-Plated
• Display: Analog
• Lug Width: 19 mm
• Case Size: 40 mm
• Type: Wristwatch
• Caseback: Screwback
• Features: Acrylic Crown,Day/Date,Push/Pull Crown
• Case Finish: Brushed/Matte/Polished
• Year Manufactured: 1970-1979
• Model: Day-Date
• Department: Men
• Dial Color: Black
• Brand: Sheffield
• Age: Vintage 1970’s

]]> https://watch-repair-part.net/2021/01/06/vintage-sheffield-day-date-diver-watch-withmint-dial-runs-strong-for-partsrepair/feed/ 0 https://watch-repair-part.net/2020/11/27/vintage-zodiac-sea-skate-diver-watch-withsigned-crown-runs-strong-for-partsrepair/ https://watch-repair-part.net/2020/11/27/vintage-zodiac-sea-skate-diver-watch-withsigned-crown-runs-strong-for-partsrepair/#comments Fri, 27 Nov 2020 08:27:49 +0000 http://watch-repair-part.net/2020/11/27/vintage-zodiac-sea-skate-diver-watch-withsigned-crown-runs-strong-for-partsrepair/ Read more]]>













FOR REPAIR – The movement runs about 7 minutes fast by the end of its approximate 38 hour power reserve period. And while the time can be set without issue when the crown is wound too quickly it will occasionally sound like crunching lettuce. I’ve noticed that if the crown is wound very slowly this sound is greatly reduced. Given that the movement runs a bit fast and considering the issue with the crown a complete overhaul is needed. This seldom seen vintage Zodiac Sea Skate is an example of a watch that in my humble opinion presents beautifully in person. It has a black “SWISS” only signed dial that shows age-related spotting and the original lume, which remains fully intact and no longer emits a glow after being exposed to bright light, has aged gracefully. This reference came with a smooth, fixed bezel. The all stainless steel case shows moderate wear and signs of oxidation. The outside of the case back is stamped “ZODIAC SEAWOLF WATER-TESTED 20 ATM ESPECIALLY” and between the lugs at 6 o’clock are the stamped numbers 1286892. The crystal shows scratching. The case back on Sea Wolf’s are notoriously difficult to remove and should be done by a skilled watchmaker familiar with how to do so in order to avoid causing damage. While the movement runs strong it does run fast. After winding the crown 39 full revolutions the movement was running about 7 minutes fast by the end of its approximate 38 hour power reserve period. And when the signed crown is wound too quickly it will occasionally sound like crunching lettuce. This watch measures approximately 35 mm excluding the crown, approximately 38 mm including the crown and approximately 18 mm between the lugs. Case thickness, measured from the bottom of the case back to the top of the fixed bezel is approximately 6 mm. Including the crystal case thickness measures approximately 9 mm. As such there are no warranties, express or implied, attached with the sale of this watch. Vintage means old and while my personal belief is that old-school means better quality and workmanship, things can and do go wrong from time to time. For this watch that time is now. Any servicing costs going forward are your responsibility. And please study the 12 high magnification pictures carefully as they are part of the description and serve as an accurate representation of the condition of this watch. The item “Vintage Zodiac Sea Skate Diver Watch withSigned Crown, Runs Strong FOR PARTS/REPAIR” is in sale since Sunday, July 26, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “savethetreestoday” and is located in Issaquah, Washington. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Ukraine, Cayman islands.

• Features: Acrylic Crystal,Push/Pull Crown,Water-Resistant
• Case Finish: Matte/Polished
• Year Manufactured: 1960-1969
• Dial Color: Black
• Display: Analog
• Movement Type: Mechanical (Automatic)
• Country/Region of Manufacture: Switzerland
• Dial Style: 12-Hour Dial
• Lug Width: 18 mm
• Case Size: 35 mm
• Serial Number: 1286892
• Type: Wristwatch
• Brand: Zodiac
• Water Resistance: 200 m (20 ATM)
• Model: Sea Skate
• Department: Men
• Style: Casual,Diver,Sport
• Case Material: Stainless Steel

]]> https://watch-repair-part.net/2020/11/27/vintage-zodiac-sea-skate-diver-watch-withsigned-crown-runs-strong-for-partsrepair/feed/ 0