https://watch-repair-part.net Sat, 16 May 2026 15:28:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://watch-repair-part.net/2025/11/09/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part-2/ https://watch-repair-part.net/2025/11/09/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part-2/#comments Sun, 09 Nov 2025 15:45:46 +0000 https://watch-repair-part.net/2025/11/09/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part-2/ Read more]]>


Watch Second Hand Remover Tool Setting Fitting Press Holder Support Durable Parts. This tool was designed to make watch hand fitting as simple as possible. Watch Hand Setting and Fitting Press Holder. This watch hand removing press is great for removing delicate watch hands from the movement without touching the dial. Insert the pin closest in size to your watch hand along with the extractor into the handle. Twist the red knurled handle top to move the pin up and down, then lift the hands off when the pin and extractor are in place. Made of stainless steel. Multiple kit features available. Watch non-marking needle starting tool, won’t touch the dial, repair watch tool! Four handles Seconds Sec/Minutes Min/Hours Hour/Hours Hour, one base. Starting second hand 0.15mm diameter 1pc. Starting hand diameter 0.6mm/1.0mm each 1pc. Hour and minute pin bore 0.35X1.2X3.3mm 1 pc. Start and minute pin bore 0.3X0.8X3.3mm 1 pc. Needle Lifter U-width 0.6mm/1.45mm 2pcs each. Needle Lifter U-Width 2.1mm 2pcs. Needle Lifter U-Width 2.4mm/2.9mm 1pc each.

]]> https://watch-repair-part.net/2025/11/09/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part-2/feed/ 0 https://watch-repair-part.net/2025/07/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-2/ https://watch-repair-part.net/2025/07/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-2/#comments Tue, 22 Jul 2025 17:17:02 +0000 https://watch-repair-part.net/2025/07/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-2/ Read more]]>


Perfect tool for repairing the watch. Easy and convenient to carry and use. Necessary tool for watchmakers and watch repairing workers. Great for closing your watch case after resizing or repair job. You can press the tool by tightening the top handle, which means you have full control over the pressure used. It is easy to break the watch with other tools while you feel it prefect to close case with our tool. Face down configuration means the repair person sees the case back being closed. Material: Stainless Steel + Aluminium Alloy + Wood Color: Shown As Pictures Press Tool Size: As shown Pics Weight: 1692.6 g Type: Repair Tools & Kits. 1 Watch Press Tool 25 Dies. Due to the light and screen setting difference, the item’s color may be slightly different from the pictures. Pls allow slight dimension difference due to different manual measurement.

]]> https://watch-repair-part.net/2025/07/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-2/feed/ 0 https://watch-repair-part.net/2025/05/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part/ https://watch-repair-part.net/2025/05/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part/#comments Thu, 22 May 2025 10:15:52 +0000 https://watch-repair-part.net/2025/05/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part/ Read more]]>


Perfect tool for repairing the watch. Easy and convenient to carry and use. Necessary tool for watchmakers and watch repairing workers. Great for closing your watch case after resizing or repair job. You can press the tool by tightening the top handle, which means you have full control over the pressure used. It is easy to break the watch with other tools while you feel it prefect to close case with our tool. Face down configuration means the repair person sees the case back being closed. Material: Stainless Steel + Aluminium Alloy + Wood Color: Shown As Pictures Press Tool Size: As shown Pics Weight: 1692.6 g Type: Repair Tools & Kits. 1 Watch Press Tool 25 Dies. Due to the light and screen setting difference, the item’s color may be slightly different from the pictures. Pls allow slight dimension difference due to different manual measurement.

]]> https://watch-repair-part.net/2025/05/22/watchmaker-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part/feed/ 0 https://watch-repair-part.net/2024/12/26/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part/ https://watch-repair-part.net/2024/12/26/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part/#comments Thu, 26 Dec 2024 21:32:41 +0000 https://watch-repair-part.net/2024/12/26/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part/ Read more]]>


Watch Second Hand Remover Tool Setting Fitting Press Holder Support Durable Parts. This tool was designed to make watch hand fitting as simple as possible. Watch Hand Setting and Fitting Press Holder. This watch hand removing press is great for removing delicate watch hands from the movement without touching the dial. Insert the pin closest in size to your watch hand along with the extractor into the handle. Twist the red knurled handle top to move the pin up and down, then lift the hands off when the pin and extractor are in place. Made of stainless steel. Multiple kit features available. Watch non-marking needle starting tool, won’t touch the dial, repair watch tool! Four handles Seconds Sec/Minutes Min/Hours Hour/Hours Hour, one base. Starting second hand 0.15mm diameter 1pc. Starting hand diameter 0.6mm/1.0mm each 1pc. Hour and minute pin bore 0.35X1.2X3.3mm 1 pc. Start and minute pin bore 0.3X0.8X3.3mm 1 pc. Needle Lifter U-width 0.6mm/1.45mm 2pcs each. Needle Lifter U-Width 2.1mm 2pcs. Needle Lifter U-Width 2.4mm/2.9mm 1pc each.

]]> https://watch-repair-part.net/2024/12/26/watch-second-hand-remover-tool-setting-fitting-press-holder-support-durable-part/feed/ 0 https://watch-repair-part.net/2024/12/01/watchmaker-tool-closer-press-set-fitting-repair-part-watch-repair-tool-machines/ https://watch-repair-part.net/2024/12/01/watchmaker-tool-closer-press-set-fitting-repair-part-watch-repair-tool-machines/#comments Sun, 01 Dec 2024 08:19:42 +0000 https://watch-repair-part.net/2024/12/01/watchmaker-tool-closer-press-set-fitting-repair-part-watch-repair-tool-machines/ Read more]]>


Perfect tool for repairing the watch. Easy and convenient to carry and use. Necessary tool for watchmakers and watch repairing workers. Great for closing your watch case after resizing or repair job. You can press the tool by tightening the top handle, which means you have full control over the pressure used. It is easy to break the watch with other tools while you feel it prefect to close case with our tool. Face down configuration means the repair person sees the case back being closed. Material: Stainless Steel + Aluminium Alloy + Wood Color: Shown As Pictures Press Tool Size: As shown Pics Weight: 1692.6 g Type: Repair Tools & Kits. 1 Watch Press Tool 25 Dies. Due to the light and screen setting difference, the item’s color may be slightly different from the pictures. Pls allow slight dimension difference due to different manual measurement.

]]> https://watch-repair-part.net/2024/12/01/watchmaker-tool-closer-press-set-fitting-repair-part-watch-repair-tool-machines/feed/ 0 https://watch-repair-part.net/2024/11/30/watch-repair-tool-watch-hand-setting-and-fitting-press-holder-support/ https://watch-repair-part.net/2024/11/30/watch-repair-tool-watch-hand-setting-and-fitting-press-holder-support/#comments Sat, 30 Nov 2024 20:18:41 +0000 https://watch-repair-part.net/2024/11/30/watch-repair-tool-watch-hand-setting-and-fitting-press-holder-support/ Read more]]>


Watch Hand Setting and Fitting Press Holder Support taking minute and second hands without damaging the dial. Watch Hand Setting and holder. The watch hand removing tool is very good for removing delicate watch hands from the movement without touching the dia. This size of the support hole is 8.0mm, which can support Bergeon. And watch hand setting and fitting tools which is made in China.

]]> https://watch-repair-part.net/2024/11/30/watch-repair-tool-watch-hand-setting-and-fitting-press-holder-support/feed/ 0 https://watch-repair-part.net/2024/11/05/metal-watch-setting-tool-hands-fitting-steel-3-runners-repair-machine-parts/ https://watch-repair-part.net/2024/11/05/metal-watch-setting-tool-hands-fitting-steel-3-runners-repair-machine-parts/#comments Tue, 05 Nov 2024 18:38:50 +0000 https://watch-repair-part.net/2024/11/05/metal-watch-setting-tool-hands-fitting-steel-3-runners-repair-machine-parts/ Read more]]>













Metal Watch Setting Tool Hands Fitting Steel 3 Runners Repair Machine Parts. Placing or replacing watch hands is now easier than ever with this unique machine. Place hand on stem and with a gentle push, fit the hand over the hour, minute or second drive shaft. The watch hand setting machine has three pins and two movement holders. With the simple construction, it is easy to handle and operate. The generality and compatibility make low costs. The machine can be used for assembling watch hands accurately. Also it improves the efficiency of watch hands assembling. A fantastic tool for watchmakers and hobbyists. 1 x Metal Watch Setting Tool.

]]> https://watch-repair-part.net/2024/11/05/metal-watch-setting-tool-hands-fitting-steel-3-runners-repair-machine-parts/feed/ 0 https://watch-repair-part.net/2023/12/18/automatic-watch-hand-installing-fitting-4-pin-installation-repairing-tool-parts/ https://watch-repair-part.net/2023/12/18/automatic-watch-hand-installing-fitting-4-pin-installation-repairing-tool-parts/#comments Mon, 18 Dec 2023 06:41:00 +0000 https://watch-repair-part.net/2023/12/18/automatic-watch-hand-installing-fitting-4-pin-installation-repairing-tool-parts/













Automatic Watch Hand Installing Fitting 4 Pin Installation Repairing Tool Parts. Interchangeable stakes made of synthetic material. Enhanced guidance of the spindles. High precision of positioning. Tip sizes (External Ø x Internal Ø). Ø2.60 x Ø1.60mm (Yellow). Ø2.10 x Ø1.20mm (Red). Ø1.70 x Ø0.60mm (Grey).

]]> https://watch-repair-part.net/2023/12/18/automatic-watch-hand-installing-fitting-4-pin-installation-repairing-tool-parts/feed/ 0 https://watch-repair-part.net/2023/03/24/new-smart-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-tool/ https://watch-repair-part.net/2023/03/24/new-smart-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-tool/#comments Fri, 24 Mar 2023 14:48:27 +0000 https://watch-repair-part.net/2023/03/24/new-smart-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-tool/ Read more]]>













Tool Watch Back Crystal Case Closer Press Set Fitting Repair Part Too. Description: Tool Watch Back Case Opener Closer Press Set Fitting Repair Kit. It is made of aluminum alloy to ensure strength. It comes with an assortment of dies. These exclusive straight wall nylon dies will not scratch or watch plate. No need to worry about that watch stops work, you can fix your watch without repairer. Specification: Material: Aluminum Alloy Size: 36x10x20.5cm Package Includes: 1 Set Watch Repair Tools Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Tools & Repair Kits”. The seller is “snihanany_0″ and is located in this country: CN. This item can be shipped worldwide.

• Origin: Mainland China
• Brand: Unbranded
• Type: Tools
• Item Type: Repair Tools & Kits
• Country/Region of Manufacture: China
• Type of Tool: Screwdriver

]]> https://watch-repair-part.net/2023/03/24/new-smart-tool-watch-back-crystal-case-closer-press-set-fitting-repair-part-tool/feed/ 0 https://watch-repair-part.net/2019/01/26/fitting-a-new-jewel-to-a-watch-part-2-of-2-friction-fit-balance-jewel-hole-is-broken-omega-watch/ https://watch-repair-part.net/2019/01/26/fitting-a-new-jewel-to-a-watch-part-2-of-2-friction-fit-balance-jewel-hole-is-broken-omega-watch/#comments Sat, 26 Jan 2019 05:07:35 +0000 http://watch-repair-part.net/2019/01/26/fitting-a-new-jewel-to-a-watch-part-2-of-2-friction-fit-balance-jewel-hole-is-broken-omega-watch/ ]]> https://watch-repair-part.net/2019/01/26/fitting-a-new-jewel-to-a-watch-part-2-of-2-friction-fit-balance-jewel-hole-is-broken-omega-watch/feed/ 0